#ZedShed Project - Imola Z3M

Nodzed

Zorg Expert (II)
Supporter
British Zeds
M Power
Joined
Feb 18, 2016
Points
231
Location
Forest of Dean, Gloucestershire, England
Model of Z
Z3M Imola and Z4 (e89)

Nodzed

Zorg Expert (II)
Supporter
British Zeds
M Power
Joined
Feb 18, 2016
Points
231
Location
Forest of Dean, Gloucestershire, England
Model of Z
Z3M Imola and Z4 (e89)
So she's stripped but the sills were not good so I have two new ones to go with her to the paint shop. BUT what was she like under those rotten sills? Well it could have been worse, the sills are toast as suspected but the inner sills only had surface rust which was quickly taken care of, then a good coat of metal stabiliser put on and left to dry over night.

Next several coats of Zinc primer and looking like new again. Next job is to Waxoyl (NB other brands of wax protection products are available ;)) the inside of the inner sills with aerosol Waxoyl and when shes back from the sprayers I'll Waxoyl the outside of the inner sill, the inside of the outer sills and have the wings off and do behind those too.

Not to scare anyone but the rear of the sills were crammed tight with muck for about 6 inch's, if you've never had them off and your sills are still in fair condition you may want to consider a winter project.

20171018_175306.jpg
20171018_175317.jpg
20171018_175326.jpg
20171018_182944.jpg
20171018_182953.jpg
20171019_113846.jpg
20171019_113837.jpg
 
Last edited:

PHILIP BAXTER

Zorg Guru (V)
Supporter
British Zeds
Joined
May 3, 2015
Points
180
Location
Cardiff
Model of Z
Z3 3.0i Roadster
Good work Niall. She will be a real show stopper when she's done. You must be really pleased with it. :thumbsup:
 

Althulas

Zorg Guru (V)
Supporter
British Zeds
Joined
Jun 14, 2014
Points
198
Location
Banburyshire
Model of Z
M Roadster
The ends of my sills are not worth salvaging either and after collecting a few sills I’ve decided to get some new ones. My off side wing is bad to but have two new panels for the front and some excellent rears and bonnet all painted up in storage to go on after the new roof is fitted.

I hope I have only a similar story or less underneath when it comes to swap them all over. @Nodzed are you going to use Por 15 over your inner sill? From what I understand it reacts against water, but I suppose the sills should come off annually to clear the crap out.
 

Nodzed

Zorg Expert (II)
Supporter
British Zeds
M Power
Joined
Feb 18, 2016
Points
231
Location
Forest of Dean, Gloucestershire, England
Model of Z
Z3M Imola and Z4 (e89)
are you going to use Por 15 over your inner sill? From what I understand it reacts against water, but I suppose the sills should come off annually to clear the crap out.
If I knew what POR 15 was I may consider it :D No good old fashion Waxoyl for me its always done a sterling job, inject it into the sills through the holes so the inside of the box section is fully coated, then give the outside about 5 coats letting it dry in between, the the same on the inside of the outer sill. The underside, behind the wings and arches will get the same treatment before she goes back on the road.
 

Mnbrennan

Zorg Guru (IV)
British Zeds
M Power
#ZedShed
Joined
Jul 25, 2015
Points
153
Location
Aylesbury
Model of Z
BMW M Coupe / 2.8 roadster
POR15 is what I used on my sills, however yours looks more OEM

20170227_164817.jpg
 

Nodzed

Zorg Expert (II)
Supporter
British Zeds
M Power
Joined
Feb 18, 2016
Points
231
Location
Forest of Dean, Gloucestershire, England
Model of Z
Z3M Imola and Z4 (e89)
Had a read on the tinternet, looks like good stuff. No reason I guess you can use that then top with zinc for the OEM look??
 

Grumps

Always happy, apart from when I'm not 🤬
Supporter
British Zeds
Joined
Apr 27, 2014
Points
226
Location
Forest Town, Mansfield
Model of Z
Z4 e85 2.5i
On topic here but maybe just slightly off.......:whistle:. Could you give me an idiot's guide to removing the sill covers please? Fank you :)
 

5harp3y

Zorg Guru (IV)
British Zeds
Joined
Jul 10, 2015
Points
168
Location
Basingstoke
Model of Z
2.8
Had a read on the tinternet, looks like good stuff. No reason I guess you can use that then top with zinc for the OEM look??
You can paint over some por15 stuff.

It goes on like concrete it's so hard
 

Tearoom

Zorg Guru (III)
Supporter
British Zeds
The M44 Massive
Joined
Feb 3, 2016
Points
135
Location
Bristol
Model of Z
1.9 M44
Can you still get new sill covers, I've been keeping an eye on ebay hoping a good pair will turn up.
 

andyglym

Shiny Dust Caps Make Your Zed Go Faster.
Supporter
British Zeds
Joined
Feb 20, 2015
Points
231
Location
Moresby, West Cumbria, England
Model of Z
2.8 Roadster
Can you still get new sill covers, I've been keeping an eye on ebay hoping a good pair will turn up.
Yup, got a pair from the BMW main dealer, arrived less than 24hrs after ordering. I think I paid £110 a side (Roadster)
 

Tearoom

Zorg Guru (III)
Supporter
British Zeds
The M44 Massive
Joined
Feb 3, 2016
Points
135
Location
Bristol
Model of Z
1.9 M44
I'm hoping to remove my sills this winter and have a good look at them (and what's behind them) good to know I can get new ones if needed.
 

Nodzed

Zorg Expert (II)
Supporter
British Zeds
M Power
Joined
Feb 18, 2016
Points
231
Location
Forest of Dean, Gloucestershire, England
Model of Z
Z3M Imola and Z4 (e89)
Can you still get new sill covers, I've been keeping an eye on ebay hoping a good pair will turn up.
Yep got mine from Cotswold BMW and a good discount :thumbsup:
 

Nodzed

Zorg Expert (II)
Supporter
British Zeds
M Power
Joined
Feb 18, 2016
Points
231
Location
Forest of Dean, Gloucestershire, England
Model of Z
Z3M Imola and Z4 (e89)
Well she's away to be sprayed :) feel like a kid waiting for Christmas :D:D

20171116_165003.jpg
 
Top