Would love to come get my rear subfame done i may take my stainless back so they can flange the back box to make it an easier job 
#ZedShed banter thread
- Thread starter Lee
- Start date
Hi Lee, I feel honoured to be the first.Right, further to the 12 tonne press. I've machined a puck to help push out the old bushes square. I used a Powerflex bushe for size and took 0.5 off the OD to make it a better fit.
We have @ZTec dropping his zed in this weekend so he will be the first to test it on. If all being good we can do a 1 day turn around on subframes
View attachment 38490
View attachment 38491
With thanks to @ZTec and @Nifty Fifty a few more items were purchased to replace the worn out tools. Thank you guys.
Guys, it was a pleasure to give a donation, its the least I could do and I know what I donated is a fraction of what I would have had to pay for the work carried out.
Twas a nice evening in the 'shed with Lee & Paul. New brakes for me, and Paul needed a refurbished front cross brace fitting to his Z3. The current one had holes in it where there shouldn't be. The new-old one looks good with a good covering of black hammerite!
It would have been rude to not take both my Z4 out to bed the brakes in, and for Paul to check the correct fitting of his new brace... so off we wen't in to the Hampshire countryside, along with Lee & @Shortie_gal.
Mini Zed cruise time. Parked up midway so we can grab a Costa coffee! It's not all work and no play in the 'shed
It would have been rude to not take both my Z4 out to bed the brakes in, and for Paul to check the correct fitting of his new brace... so off we wen't in to the Hampshire countryside, along with Lee & @Shortie_gal.
Mini Zed cruise time. Parked up midway so we can grab a Costa coffee! It's not all work and no play in the 'shed
Shortie_gal
Zorg Guru (III)
- Joined
- Dec 13, 2014
- Points
- 128
- Model of Z
- Z3 2.2i Sport
I was actually really surprised i kept up! Obv you did lose me a bit but i wasnt too far behind
It was a lovely little run... Or should that be 'sprint' to the coffee machine... The z3's did well considering the z4's had 3.0 engines and a nutter at each wheel.
Looks like you all had a nice evening while I was sat at the bloody motorway services all night!
- Joined
- Dec 5, 2011
- Points
- 175
Why's that plate not on your car @Lee ?Welcomed a newbie to the #ZedShed today. Induction carried out at the usual catering van...
View attachment 42515
View attachment 42516
Even put him to work
View attachment 42517
You've lost me ?
- Joined
- Dec 5, 2011
- Points
- 175
Sexy lee is far more fitting
- Joined
- Dec 5, 2011
- Points
- 175
- Joined
- Mar 15, 2015
- Points
- 191
Nice to see @NODZED has paid the Zed Shed a visitWelcomed a newbie to the #ZedShed today. Induction carried out at the usual catering van...
View attachment 42515
View attachment 42516
Even put him to work
View attachment 42517
- Joined
- Feb 18, 2016
- Points
- 231
- Model of Z
- Z3M Imola and Z4 (e89)
Just buttering them up, I need my shocks changing and I don't have a spring compressor .... but I did spot one in they're collection
Mind you I think my shocks were OK until @Lee got behind the wheel 
(only kidding mate)
@NODZED @Low Rider well someone has to test the shocks to the designed loading around corners... You corner shop runners...
- Joined
- Feb 18, 2016
- Points
- 231
- Model of Z
- Z3M Imola and Z4 (e89)
Being sensible keeps my Insurance lady very happy and my premiums down (and what see dont see on the odd occasion wont hurt her )
(and what see dont see on the odd occasion wont hurt her )