And to add, it's a excellent bit of kit, very pleased with it.Yip..I blatantly copied you![]()
Does this simply plug in or has it got to be wired in?I got an USB C dual port adapter, connected to the cigarette lighter, but the adapter has an on off switch:
View attachment 258161View attachment 258163
So, even thou the cig lighter is always hot, I can actually switch off the USB adapter. Not that an adapter hot wired, but not charging anything, would consume that much battery power...
The one I bought is:
It takes the place of the cigarette lighter, and is wired to the original power supply (red/black/white and a brown wire). I replaced the connectors that come with the adapter's wire with blade connectors, and also used a Dremel to widen the opening in the console by ~ 1mm.Does this simply plug in or has it got to be wired in?
Not only is the top in very good condition, but Dan helped me (well, mostly did it) install it, as I had no clues as to where to start. What a gentleman!That looks a good condition hardtop Mus. Good shine on it!![]()
Yeah, Dan mentioned that to me, and the four hour drive to get the hardtop. I am assuming that's one way, as it took me over eight and a half hours to get to his place, fit the top, then get home. To be fair, I stopped at Andy's and had at least an hour of delays due to accidents, but hey!Last seen 2 doors up from the Shed Jose.
Tony.
How’s about a write-up on how you did this to post in the Resources section so other members can follow a step-by-step guide?It takes the place of the cigarette lighter, and is wired to the original power supply (red/black/white and a brown wire). I replaced the connectors that come with the adapter's wire with blade connectors, and also used a Dremel to widen the opening in the console by ~ 1mm.
This is a photo of the adapter and the wiring that comes with it:
View attachment 258425
Well, it's not a particularly difficult thing to do, but involved removing the centre console in my case. If I had the real cigarette lighter I would only need to move the side panels, apparently.How’s about a write-up on how you did this to post in the Resources section so other members can follow a step-by-step guide?
The future isn't rosy then Pete.
Tony.
That recovery driver looks really depressed, I think he might be heading for a breakdownQUOTE="t-tony,
Not only for the Z, but the Oil Burner as well.
View attachment 258899
funny you should say that.
I have one of those signs on my garage,
and this is my Eup 3 weeks ago:
View attachment 258895
and my missus works Audi earlier this year:
View attachment 258897
both broken down and had to go to the dealerships.
My eUp is still there possibly needing a new HV battery....
Bloody new German crap.