#ZedShed Siena Red 3.0 Front to Back
- Thread starter Lee
- Start date
Is that non stick coating like you see in pots n pans ?
When I'm home I'll ping him a message.
Last edited:
I'm familiar with this technique, we did this with copper plating on A4-80 bolts on a reactor I built.
Might be over kill for a car.
Might be over kill for a car.
Quick few photos of last weekends work. She can smell the tarmac now.
Subframe with one arm in and fitted.
other arm is waiting on parts.
Beam bushes nice n high now
prop shaft also went in.
fuel filter was replaced, and on this rare occasion not that old.
All things being well arm will be in tomorrow and wheels down end of this week.
Subframe with one arm in and fitted.
other arm is waiting on parts.
Beam bushes nice n high now
prop shaft also went in.
fuel filter was replaced, and on this rare occasion not that old.
All things being well arm will be in tomorrow and wheels down end of this week.
Fantastic job guys. Can I ask who you use for powder coating and what underseal you use? I'm in the early stages of the same job but outside in the driveway...
We take the corrosion back to bare metal and seal it in with hammerite under seal & waxoil mix. Other surfaces we clean and seal in.Fantastic job guys. Can I ask who you use for powder coating and what underseal you use? I'm in the early stages of the same job but outside in the driveway...
Nice big update chaps. Car is now down on the ground ready for her test drive. We started her up and she sounds sweet.
Last arm we built today. We noticed we had some alignment issues. Closer inspection showed one of the brake calliper tabs had a slight bend, must of been dropped at some point. Few gentle taps and she was back.
Clash
very shortly after this we got the arm fitted along with the rest of the trays.
she’s going to drive so nice now. Full body under shots.
wheels on
inside wheel shots.
let her rest on the lowering springs. The shocks and springs need to settle.
only a few snags to sort now. Water pump and thermostat. Take her for a test drive and get the tracking done then finally the MOT.
Last arm we built today. We noticed we had some alignment issues. Closer inspection showed one of the brake calliper tabs had a slight bend, must of been dropped at some point. Few gentle taps and she was back.
Clash
very shortly after this we got the arm fitted along with the rest of the trays.
she’s going to drive so nice now. Full body under shots.
wheels on
inside wheel shots.
let her rest on the lowering springs. The shocks and springs need to settle.
only a few snags to sort now. Water pump and thermostat. Take her for a test drive and get the tracking done then finally the MOT.
Top work as usual guys.
Tom Holland
Zorg Addict
- Joined
- Jun 28, 2017
- Points
- 49
All but the wheels are , they have done me proudThat looks a totally different car. Superb job as usual
Last few jobs done today. Test drive complete and tracking done. First job of the day was the thermostat and water pump.
First up removing the thermostat showing the water pump
Water pump then removed
Old units next to the new.
she didn’t cause me any issues all went smoothly. Next up was some fresh gearbox oil.
Followed by a nice test drive and wheel alignment.
she’s got a nice stance and handles nice, lowered on Eibach springs with HnR roll bars.
Clear dash of lights.
MOT ready for Saturday
She’s keeping good company till then.
First up removing the thermostat showing the water pump
Water pump then removed
Old units next to the new.
she didn’t cause me any issues all went smoothly. Next up was some fresh gearbox oil.
she’s got a nice stance and handles nice, lowered on Eibach springs with HnR roll bars.
Clear dash of lights.
MOT ready for Saturday
She’s keeping good company till then.
Excellent as usual Team ZedShed 
Bloody hell Lee, the more Zeds you and the guys turn round, the worse it’s looking for the time its taking me just to do just one ………..,,And I have all week to work on mine 
100:1 ratioBloody hell Lee, the more Zeds you and the guys turn round, the worse it’s looking for the time its taking me just to do just one ………..,,And I have all week to work on mine
Definitely going to stick something in the breakfast baps to slow them down……. Or tempt them down to Bognor with butties, cakes and coffees to get mine done 
only joking …. They have enough to do !!
And in reality…. I keep getting sidetracked
But mine needs to be done as I have booked a hotel for @t-tony ’s run next sept And it would be nice to take it for that cruise.
only joking …. They have enough to do !!
And in reality…. I keep getting sidetracked
But mine needs to be done as I have booked a hotel for @t-tony ’s run next sept
And it would be nice to take it for that cruise.
Located in my home village Malc. I didn't travel far.
Tony.
Tony.
Siena now has a fresh MOT. She’s done with us for now. Tom can now go enjoy her.
Back from MOT
Low in the back due lots of steel work in the boot
Rude not to hide a sticker under the bonnet.
Back from MOT
Low in the back due lots of steel work in the boot
Rude not to hide a sticker under the bonnet.