Show us your...hubcentric wheel setup

[bp;ptxus]

seems a bit big normally 40 or 35 profile with 18s i think.... i could be wrong though...

45 profile makes it a 26.7 inch cicrcumfrance insread of 24.8 inch... according to tyresize.com

HJ was right, and I got it wrong: they are
Front: 225/45/18
Rear: 255/40/18
Oops!

 

[Antm72]

Although not hubcentic a perfect set up without spaces.
Fronts
225/40/18 offset 38 width 8.5J

Rear
255/35/18 offset 33 width 9.5J
The arches are filled nicely and as low as it sits nothing fouls...

The car sits alittle higher now after a rear end rebuild earlier in the year. Suprising how much a little sag here and there in the bushes changed the geometry of the car.

 

[Sean d]

Recently fitted 20mm rear, looking at the front I think it needs 10s

 

[bp;ptxus]

seems a bit big normally 40 or 35 profile with 18s i think.... i could be wrong though...

45 profile makes it a 26.7 inch cicrcumfrance insread of 24.8 inch... according to tyresize.com

HJ was right, and I got it wrong: they are
Front: 225/45/18
Rear: 255/40/18
Oops!

 

[2DunnsZ3]

Although not hubcentic a perfect set up without spaces.
Fronts
225/40/18 offset 38 width 8.5J

Rear
255/35/18 offset 33 width 9.5J
The arches are filled nicely and as low as it sits nothing fouls...
View attachment 92158
The car sits alittle higher now after a rear end rebuild earlier in the year. Suprising how much a little sag here and there in the bushes changed the geometry of the car.

But is your car an M or did you just change out the side vent.

 

[Antm72]

But is your car an M or did you just change out the side vent.

Its a 2.8

 

[Nodzed]

Z3 on 15s rear 10 front
Z4 15s all round

 

[Nodzed]

Although not hubcentic a perfect set up without spaces.
Fronts
225/40/18 offset 38 width 8.5J

Rear
255/35/18 offset 33 width 9.5J
The arches are filled nicely and as low as it sits nothing fouls...
View attachment 92158
The car sits alittle higher now after a rear end rebuild earlier in the year. Suprising how much a little sag here and there in the bushes changed the geometry of the car.

That's a lovely Zed

 

[2DunnsZ3]

Its a 2.8

mine is lowered in the front. So I wonder if yours has been lowered or is standard highth

 

[Antm72]

-40 all round Apex springs and Bilstein B12 suspension.

 

[2DunnsZ3]

awesome, so I should be fine. thanks so much for all the info