Jim's Z3 Journey

Currently have:
  • ‘97 1.9 manual, in Arctic Silver
  • ‘97 2.8 manual, in Montreal Blue
  • ‘98 2.8 auto, in Arctic Silver
  • ‘01 2.2 manual, in Sapphire Black

I’m planning on keeping the 2.8 Blue and 2.2 Black.

The other will go up for sale when they are ready.

All 4 have hardtops & sports seats.
 
Just taken delivery of these. :cool:

One for the Blue Z3 and one for the Black (with red interior) Z3.

EDB5CE53-2B73-4D0F-A35E-514ADACB5372.webp

Sad I know =))
 
Using @5harp3y instructions I made myself an LED relay for the indicators. :thumbsup:

I got some LED indicators for the front, rear and side.

Comparison of LED (drivers side) vs filament bulb (passenger side):
05C4FB40-3A14-4C64-AA00-918224EE7DF7.webp

Drivers side LED
815CA7AD-D6FB-460A-BC90-049D3BC21005.webp

Rear original filament bulb:
48504504-CB0D-41A6-910B-8A143FE20260.webp


Rear LED bulb:
404D7C0E-7609-4512-A760-25DCA14E3409.webp


Side original bulb:
A2A9E6A0-CF86-4613-AAD2-5334E69923C9.webp


Side LED bulb:
8DE0F75E-6DAD-45B6-B588-7C4CCAC6032D.webp


Photos don’t do it justice. They LEDs look rich and deep orange. Very happy :thumbsup:

As expected I had hyper flashing until I installed the modified relay. Now all is good.

Might look into making sets of these up.
 
Using @5harp3y instructions I made myself an LED relay for the indicators. :thumbsup:

I got some LED indicators for the front, rear and side.

Comparison of LED (drivers side) vs filament bulb (passenger side):
View attachment 98098

Drivers side LED
View attachment 98097

Rear original filament bulb:
View attachment 98100


Rear LED bulb:
View attachment 98099


Side original bulb:
View attachment 98103


Side LED bulb:
View attachment 98101


Photos don’t do it justice. They LEDs look rich and deep orange. Very happy :thumbsup:

As expected I had hyper flashing until I installed the modified relay. Now all is good.

Might look into making sets of these up.

Glad you made one!
 
Blue is out from winter storage :D:cool:

E69307D1-611B-4D3E-A381-FE30B8449B49.webp

First thing was to change the ariel got a stubby now. Much better :thumbsup:

578206C3-B645-485E-84CC-662991011AAC.webp
242F6834-07C3-40DB-B7AB-2AE4D468BBD7.webp
 
Had a spare 5 mins whilst the lady of the house was out so thought I would make good use of it to fit my new steering wheel from Royal’s to Blue :cool:

5B834C28-950D-4A3C-8508-53CE0307D5A5.webp

The old one:
45BD1659-7637-478D-8CA7-37EA0CFCF9E4.webp

The nice chunky, flat bottom, blue stitched new one:
A0D6D61F-A8EC-426B-B398-9E1E9671AA05.webp
6AAFA746-0893-4A8C-B957-77CB50AED691.webp 623FEB69-FE1E-4701-9A30-0751F96AC70D.webp
 
That looks very nice Jim.

Tony.
 
Got home before the misses today, so the Zed managed to get some attention.

Installed the angle eye side lights in a spare set of lights and then swapped them over today.

0F412407-B13F-4B5F-8C3E-8923C547AAFB.webp
4528DF52-D022-4F31-B8F1-12A3E2D35509.webp
3D08A600-4E62-4EE2-929A-2F3DC971C891.webp
C6F2094C-CAA4-4E46-9314-D7F34AFBB6DB.webp
A2F67B73-648D-45A1-8989-034D7DAFF9FF.webp
29DC50CF-F97F-49C2-87F6-B7BDA7909B65.webp
16BF5038-0E2E-47EE-BF96-535FCB4E5506.webp

Used some araldite glue to fix them in place.

Not a bad job. Used my heat gun to warm them up and split them. Only needed to remove the clear front to fit them. Took a couple of hours.

Ever since I saw @Sean d witg these I knew I had to fit them :cool:

Happy with the result..

4B095632-1A93-467A-B4AB-E6E6116BD55B.webp 345FEF93-113E-430A-AE55-D4D36B5E3361.webp

Also managed to get round to fitting the front bumper side light covers that I got from @g8jka

0C577D8C-0313-40B4-A856-AAF835E12C27.webp

Look very good with my LED sidelights. Should of taken a photo with the lights off as well.
 
Got home before the misses today, so the Zed managed to get some attention.

Installed the angle eye side lights in a spare set of lights and then swapped them over today.

View attachment 98324
View attachment 98330
View attachment 98329
View attachment 98325
View attachment 98326
View attachment 98327
View attachment 98328

Used some araldite glue to fix them in place.

Not a bad job. Used my heat gun to warm them up and split them. Only needed to remove the clear front to fit them. Took a couple of hours.

Ever since I saw @Sean d witg these I knew I had to fit them :cool:

Happy with the result..

View attachment 98331 View attachment 98333


Also managed to get round to fitting the front bumper side light covers that I got from @g8jka

View attachment 98332

Look very good with my LED sidelights. Should of taken a photo with the lights off as well.
Fantastic mate, I love walking away friom the car and looking back, they make a huge difference, first thing I do is put my lights on :thumbsup:
My favourite mod and only around £30
 
Fantastic mate, I love walking away friom the car and looking back, they make a huge difference, first thing I do is put my lights on :thumbsup:
My favourite mod and only around £30
Just got to do it again now for the Black one. Don’t want it to feel left out :whistle:=))
 
I think many people would like these but are put off by having to split the lights. Maybe an opportunity to make a couple of bob.

Tony.
 
I think many people would like these but are put off by having to split the lights. Maybe an opportunity to make a couple of bob.

Tony.
Sounds like a cunning plan :pompus:

I’m also thinking of putting some LED indicator and relay sets together.
 
I think many people would like these but are put off by having to split the lights. Maybe an opportunity to make a couple of bob.

Tony.
I would do a postal service mate, but I dare say the cost of postage would be prohibitive, could also do a full lens restoration
 
Blue had a treat today, a nice new piece of boot trim carpet.

711AA1C5-376C-465A-98CB-255411901347.webp 838EE805-2373-49ED-A474-762462525C10.webp BDA0CBDC-7A15-485A-AA2C-AFC1C2809468.webp 732779E1-97E6-4AD2-9375-E424BA31E2DE.webp CB5F2D5B-0902-44B0-92C0-61BAD8899E90.webp
 
Thanks to ZedShed Midland the Blue had new suspension all round (Monroe shocks and Eibach Pro Kit springs), diff oil change and gearbox oil change.

Oringinal suspension:
BF396D18-8A28-407F-A2E5-11F1D50D82D1.webp

With new suspension:
5E67C9FF-E19B-46CC-930C-5298EFB5B24D.webp EAD3EEC6-61C0-49B0-8BEA-91BAD0F3BF94.webp 7C234F84-2AA0-4A1A-8685-0ED2A47D7D73.webp


Compared to standard suspension and wheels on my other 2.8 Silver:
3D6C443F-4BDD-4EB4-B2EA-36A2383668AB.webp 627D06E6-622A-4BCE-88F9-6D989718D616.webp
 
Back
Top