Artic Silver 2.8 track car project
- Thread starter spurs fan in a coupe
- Start date
good effort 
- Joined
- Dec 5, 2011
- Points
- 190
No brake news, I have the parts, just no need until closer to track day.
I promised myself I'd get the manifold conversion done over the Christmas break, well, I've started and opened the box up!
Just got to find time to do it now!
I promised myself I'd get the manifold conversion done over the Christmas break, well, I've started and opened the box up!
Just got to find time to do it now!
Nice...
Is that an ECU from the eBay seller doing them for £100 - https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/142632959437
The handwriting looks familiar
You might need these too?
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/232218380566
Ive been looking for all the bits as you can tell..it’s @Lee fault I tell you!
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/232218380566
Ive been looking for all the bits as you can tell..it’s @Lee fault I tell you!
- Joined
- Dec 5, 2011
- Points
- 190
I failed, back to work tomorrow.
The Christmas break is never long enough !
Can't argue there mate, my 2 days flew by .........................................
Tony.
Tony.
- Joined
- Dec 5, 2011
- Points
- 190
Well today was the day....
Final upgraded the intake manifold and ECU.
From this
Via this
To this
Was late my the time I finished, cold, wet and dark (gritter was out), so didn't have much of a chance to gauge the difference, but the redline has certainly been upped.
Final upgraded the intake manifold and ECU.
From this
Via this
To this
Was late my the time I finished, cold, wet and dark (gritter was out), so didn't have much of a chance to gauge the difference, but the redline has certainly been upped.
Nice work Andy, too cold for that sort of job for me just now. Hope you're happy with the fruits of your labour mate!
Tony.
Tony.
Where do you get the ECU from?
Didn't know a E36 was the same ecu
Didn't know a E36 was the same ecu
- Joined
- Dec 5, 2011
- Points
- 190
Came with the mainfold (from a member on here)
Nice job Andy beats painting the kitchen.
We did the same, picked up a pre programmed ECU from ebay for £120.
- Joined
- Dec 5, 2011
- Points
- 190
For anyone wondering ...... e36 M3 brakes do not fit on a 2.8 z3!
Might keep and get some front struts, but will more than likely pop the lot on eBay. Gutted!
Might keep and get some front struts, but will more than likely pop the lot on eBay. Gutted!
- Joined
- Dec 5, 2011
- Points
- 190
Is that all it needs? I have had a quick look online and they aren't expensive new. I just don't want to chase around getting more and more elements for what isn't a huge upgrade on my 3.0 brakes that are already fitted (the discs look so good though!)
Did you trial fit @Jjim ?
Haven’t trial fitted yet. But did some research and this has been fine on lots of E36 conversions.
Also compared all part numbers on Z3M, Z3, E36 and E36 M3. Looks like the wheel hub and knuckle will swap straight over and then the calipers and discs will fit.
Also compared all part numbers on Z3M, Z3, E36 and E36 M3. Looks like the wheel hub and knuckle will swap straight over and then the calipers and discs will fit.
- Joined
- Dec 5, 2011
- Points
- 190
Happy with that!
