roose motorsport z3m silicone hose full set

Duncan123

Zorg Addict
British Zeds
Joined
Feb 8, 2015
Points
59
Location
solihull
Model of Z
m roadster
i had all of my oil breathers and ancillary hoses made by roose motorsport www.roosemotorsport.com they advertise they do club or group discount. the hoses are not as yet updated on to their website so you may be able to get a better deal if you enquire about them they are for the s50 b32 engine
11196275_10206742996917305_4753253979318338089_n.jpg
 

Brian4

Zorg Guru (IV)
British Zeds
East Anglian Crew
Joined
Dec 23, 2011
Points
173
Location
Near Grantham
Model of Z
Z3 3.0i Auto
That's going to keep you busy!!!

Will look good when done.
 

t-tony

Zorg Expert (II)
Supporter
British Zeds
#ZedShed
Joined
Dec 31, 2013
Points
226
Location
Torksey Lock,Lincoln, England
Model of Z
E89 Z4 23i Auto

Duncan123

Zorg Addict
British Zeds
Joined
Feb 8, 2015
Points
59
Location
solihull
Model of Z
m roadster
you will have to ring roose motorsport for prices as they used my pipes as a pattern so i got a good discount but if you can get enough of you together then they may do you a good discount. these will only fit m roaster m coupe s50 b32 engines they have lots of different colours. paul the manager is a really nice and helpful guy go on their website and give him a call if you are interested www.roosemotorsport.com. tbf it took more time to take all the pipes off than it did to fit them hahaha. most of the pipes are not visible as they are under the plenum but a very good upgrade as these cars are getting old and the oil breathers won't be in the best of condition. i also changed all of my vacuum hoses as 1 of them was split really badly. roose motorsport are located at a unit at the back of a soper bmw lincoln
 

t-tony

Zorg Expert (II)
Supporter
British Zeds
#ZedShed
Joined
Dec 31, 2013
Points
226
Location
Torksey Lock,Lincoln, England
Model of Z
E89 Z4 23i Auto
That's interesting Duncan, I didn't realise they were In town. May be worth a run down for a chat. Thank you,

Tony.
 

oldcarman

Zorg Guru (V)
Supporter
Canadian Zeds
The M44 Massive
Joined
Feb 11, 2014
Points
188
Location
Pine Falls Manitoba can.
Model of Z
1.9 M44
If they do complete M44 sets I'd be up for two. But not for a month or two! Maybe @t-tony wouldn't mind checking out pricing and availability for all engine sizes. Takes the worry of split pipes occurring and possibly causing more serious problems. JIM
 

t-tony

Zorg Expert (II)
Supporter
British Zeds
#ZedShed
Joined
Dec 31, 2013
Points
226
Location
Torksey Lock,Lincoln, England
Model of Z
E89 Z4 23i Auto
If I understand correctly Jim, they need a set of each different type of hoses to use as a pattern to produce copies in silicon.

Tony.
 

t-tony

Zorg Expert (II)
Supporter
British Zeds
#ZedShed
Joined
Dec 31, 2013
Points
226
Location
Torksey Lock,Lincoln, England
Model of Z
E89 Z4 23i Auto
Does yours look much like this under the bonnet Dave.
014 (2).jpg

I'm guessing not. To be honest I can't remember the last 4 pot Z3 I tested but the hoses have to be vastly different I think.

Tony.
 

oldcarman

Zorg Guru (V)
Supporter
Canadian Zeds
The M44 Massive
Joined
Feb 11, 2014
Points
188
Location
Pine Falls Manitoba can.
Model of Z
1.9 M44
I think you're right @t-tony I think someone would need to strip down all the hoses and send them to Roose to use as patterns. My car can't sit at Sean's too much longer before I ship it and it might be as stretch asking him to pull everything apart and put it all back together for me. He's amazing with what he's doing for me already and I hope if anyone around Surrey needs a valet service they'll use him. He has my bumper from Anthony Cherry and roll hoops and the HT to install plus decontamination. Will likely get another batch of pics as he goes about that and he saved me time and $$ one the Trinity car.
Also, unless someone's car is laid up no one will likely be taking all the hoses off now the weather is getting better. JIM
 

t-tony

Zorg Expert (II)
Supporter
British Zeds
#ZedShed
Joined
Dec 31, 2013
Points
226
Location
Torksey Lock,Lincoln, England
Model of Z
E89 Z4 23i Auto
The problem is with that Dave, the hoses only have to be 1" shorter, have a few degrees more twist on a bend etc and they will kink and restrict coolant flow or vacuum and then it just doesn't work. So they have to be right?

Tony.
 
Top