M52TUB28 CCV

Wilko58

Zorg Legend
British Zeds
Joined
Aug 4, 2016
Points
77
Model of Z
2.8 Individual Fiji Green
Hi,
Can anyone with a M52TUB28 preferably around October 1998 confirm if you have this CCV setup?
I've just had all the pipes and hoses on my car changed and the garage have me back three unused pipes saying they are not on my car but realoem days they are.View attachment 89245
 

Kevin Tyrer

Newbie
Joined
Jan 7, 2022
Points
3
Hi,
Can anyone with a M52TUB28 preferably around October 1998 confirm if you have this CCV setup?
I've just had all the pipes and hoses on my car changed and the garage have me back three unused pipes saying they are not on my car but realoem days they are.View attachment 89245
My 98 Z3 M52tub28 M euro spec does not seem to have the connector pipe behind the fuel rail
The throttle body is also driven by a cable.
Not sure is there were manifold changes later to include this pipe.
 

NZ00Z3

Zorg Guru (IV)
Supporter
New Zealand Zeds
Joined
Dec 9, 2014
Points
158
Location
Timaru, New Zealand
Model of Z
3.0L, 2.8L, 2.0L Z3 Roadsters
What part number are the hoses?

What is the modification history of the car? Has a pervious owner fitted an M50 inlet manifold? If so, it will not have a DISA valve.

RealOEM shows the Euro 10/98 Z3 to have the M52TU engine, so there should be a CVV hose coming off the front right (looking in from the front) of the valve cover that disappears under the inlet manifold to the CCV. Does it have one?
 

Delk

Zorg Guru (III)
British Zeds
Joined
Oct 9, 2018
Points
125
Location
Hemsby Norfolk
Model of Z
Z3 2.8 real widebody
In the past I had the M52B28TU intake manifold and later fitted the M54 3.0 one. The two crankcase vents were different and if I remember the TU engine only had the pipe that came from the separator up to the manifold (item 3). The M54 manifold had that plus the other line (item 7) that went to the small balance manifold on top of the intake.
 

Lee

Zorg Guru (V)
British Zeds
M Power
#ZedShed
Joined
Mar 26, 2014
Points
193
Location
Basingstoke
Model of Z
Z4 Coupe 3.0si
Chaps your replying to a post 4 years ago. I'll have an educated guess and say he might of sorted this.
 

Nodzed

Zorg Expert (II)
Supporter
British Zeds
M Power
Joined
Feb 18, 2016
Points
231
Location
Forest of Dean, Gloucestershire, England
Model of Z
Z3M Imola and Z4 (e89)
Chaps your replying to a post 4 years ago. I'll have an educated guess and say he might of sorted this.
Better late than never :whistle:=))
 
  • Haha
Reactions: Lee

Kevin Tyrer

Newbie
Joined
Jan 7, 2022
Points
3
I will take a picture, car is stock standard apart from the rims, definitely no connector pipe on manifold . Realoem shows hose connecting to manifold from separator on the RHS ,mine is on LHS.
 
  • Haha
Reactions: Lee
Top