idle issues

[look595ultra]

i have a 2.8 tu which have just done the m54 manifold conversion
have fitted new ecu to match,deleted sap and exhaust flap cannister
fitted manifold and disa
thanks to write up i read it all went well and works-m54b30 in performance thanks
cleaned throttle body and icv-now click clacks
except that it now idles at 1100 rpm was approx 750
also when change gear revs rise a bit
idle eventually drops when engine hot but not quickly

i am thinking throttle cable-seems ok tho maybe i kinked it slightly
or is it possible to adjust throttle body
possibly open too much ?
thanks for any help

 

[NZ00Z3]

Have a read through the doc's in the below link. There is a section in one that tells you how to adjust the throttle cable.

https://www.e46fanatics.com/threads/how-to-test-a-mdk-throttle-body.1316171/#post-19149679