SOLD Cades Apollo 19" Staggered wheels & tyres

[jamie_z4]

Bought these at the weekend for my daily but theyre a bit 'flash' for a daily, so im after some MV2s ideally in exchange.

They are kerbed round the edge but have been touched up so they are presentable. Subject to a deposit i can have them powdercoated in any colour. probably looking @ £600 all in though.

tyres are Nankang NS2 all round with ample tread almost new - 235/35/19 front 255/30/19 rear. will bolt onto ANY zed straight away with no problem with rubbing issues etc.

Front wheels are 8.5j ET38

rear wheels are 9.5j ET45

No cracks welds or buckles.

The wheels are £425 for straight sale.

here are the same wheels on some zeds

nice concave all round

if your on whatsapp i can send you plenty more pics of my actual wheels - PM me for my number

cheers

 

[Nodzed]

will bolt onto ANY zed straight away with no problem with rubbing issues etc.

Front wheels are 8.5j ET38

rear wheels are 9.5j ET45

Not the Z3 M though.

 

[JRM Z4]

Hi

I'm very interested in these.

Would you take a straight swap for my BMW style 108 wheels?

Just had two brand new run flat Bridgestone rear tyres that have only covered less than 50 miles and the fronts are michelin that came with the car when I bought it 2 months ago with plenty of tread still.

 

[Lee]

They're nice jamie. Let me know if they dont sell.

 

[jamie_z4]

Not the Z3 M though.

What makes you think that? They bolt straight onto a z4m...

Sorry Lee they are now owned by IdeJ Jedi on insta!

 

[Lee]

What makes you think that? They bolt straight onto a z4m...

Sorry Lee they are now owned by IdeJ Jedi on insta!

I was chatting with him after I saw this post. He's now had them powdercoated Black. look pretty smart.

 

[GazHyde]

What makes you think that? They bolt straight onto a z4m

Incredibly low offset on the Z3M so the standard wheels could have a deep dish on them. I think they are ET11 off the top of my head.

EDIT: just checked, they are ET8

 

[Lee]

 

[jamie_z4]

Incredibly low offset on the Z3M so the standard wheels could have a deep dish on them. I think they are ET11 off the top of my head.

EDIT: just checked, they are ET8

Yeah I know that dude, however they'll still physically fit, just would need spacers from an Asthetic point of view

Lee they certainly look a lot better in black!

 

[Nodzed]

Yeah I know that dude, however they'll still physically fit, just would need spacers from an Asthetic point of view

No they wouldn't, they would rub on the shocks, totally different set up on the rear frame to other Z3s

 

[jamie_z4]

as per my previous post, with spacers ,they'd fit

 

[Nodzed]

OK. But I doubt even a 30mm spacer would do it but lets just agree to disagree and its no longer relevant is it.